Site Plan must
be a survey plat or a site plan of the property, drawn to a standard
engineering scale (1 inch = 10 feet, 20 feet, 30 feet, 40 feet, 50 feet,
60 feet, 100 feet, 200 feet). Note plan scale used in margin. If a plat
is not recorded, please see the Zoning Department.
Site plans must be drawn on white paper no larger than 11-inches-by-17-inches. Do not use graph paper.
Clearly indicate north arrow in margin.
Include owner’s name in margin.
Indicate Property Tax Map Number. This number is located on your property tax statement issued by the County Assessor.
Show entire lot with lot line dimensions.
Give name and width of adjacent public roads and location of right of-ways.
the dimension from each property line to the proposed building
including steps, porches, decks and overhang (anything that is attached
to the house/building). Property owner must identify property lines.
location and width of private roads and access plus utility and
drainage easements adjacent to or crossing parcel, with boundaries
indicated by dashed lines.
Show any existing structures on the
property (building, shed, mobile home etc.). Show location of driveways,
parking areas, sidewalks and patios. Label previously existing
structures, driveways, etc. as existing; label all proposed development proposed.
and label proposed and existing septic tanks, wells, drain fields &
reserve area, with setbacks to property lines and structures.
Location of underground storage tanks or vaults.
Location of all bodies of water, springs, wetlands, flood zones, etc.
Stake proposed structures on site, prior to the required setback inspection.